  These quick-change pads require no backing plate!
The Edge 2000 6 Inch DuraFoam Pads will change the way you think about buffing pads. With a revolutionary Quick Change System, these pads require no backing plate and take only seconds to change. These reticulated polyester urethane foam pads are double-sided, and feature a quick connect/disconnect method of interchanging. You get twice the surface area in one pad and each pad fits your machine like a glove. No slipping, no coming off, and no hook and loop.
The unique design feature of The Edge pads is the Quick Change System. Pads snap into place and will not come off! Just push the release button on the Edge Adapter and the pad pops off. Snap a new pad into place and you’re ready to continue polishing.
 The Edge 6 Inch DuraFoam Pad is rounded on the edges, allowing for more contoured buffing, especially in areas that formally were only accessible through hand buffing. Now it is possible to machine buff under mirrors and in tight grooves with ease, adding to the advanced scope of these detailing supplies.
The thick and durable Edge Foam Pads are double sided, therefore they will last at least twice as long as single sided pads. Economically speaking, they will save money by preventing frequent purchasing of single sided pads. It’s like buying two pads at once.
These innovative pads adapt to any machine buffer. Not only is it now possible to change from a polishing to a cutting pad in seconds, it is now feasible to change pads on any machine buffer, from Porter Cable to Makita. Choose pads that fit your buffer, than use The Edge Quick Change Adapter (sold separately) to snap pads on and off. Made of chrome-plated, solid machined brass, the adapter will last for years. Screw the adapter onto the polisher, push the release button, and the pad comes off. Below is the Quick Change Adapter for Dual-Action polishers. This adapter works with the Porter Cable 7424M and all other DA polishers.
 The Edge 2000 6 Inch DuraFoam Pads are available in the following varieties:
Yellow Cutting DuraFoam Pad This pad is aggressive, and will cut through deep surface marks and swirls. They work well on heavy oxidation and pitted finishes, and will remove wet sand scratches without causing burning.
Green Medium Cutting Pad- Now with softer foam! This pad is useful for light oxidation and moderate swirls and imperfections. This pad will yield amazing results on aging vehicles, and should be used on vehicles with moderate swirls and imperfections. Add a compound or pre-wax cleaner for a flawless finish on base coats.
Orange Light Cutting DuraFoam Pad This pad is highly versatile, as it can be used on cars with light to moderate swirls and imperfections. We recommend you begin with this pad if you are unsure how deep swirls are, moving up to a Green Medium Cut Pad if necessary. Safe on clear coats. 60 pores per inch (ppi)
Blue Finishing DuraFoam Pad This pad is great for everyday use. It will leave surface areas scratch-free and smooth while still removing light swirls and imperfections. Use with wax and polish to apply a fine gloss. Safe on clear coats. 70 pores per inch (ppi)
White Ultrafine Polishing DuraFoam Pad This ultra-smooth polishing pad contains 80 pores per inch, allowing for fine polishing which creates a bold, crystalline gloss Use this pad to apply waxes, polishes and sealants. Safe on clear coats. 80 pores per inch (ppi)
Red LSP Finishing Pad
The red pad is softer than the white pad, which makes it perfect for new car finishes. Apply last step products, like waxes, sealants and glazes without fear of abrasion. The red pad also makes layering products easier. Apply multiple coats of your favorite wax or sealant with the red lsp foam pad.
Custom 6 Inch Professional Orange/Green DuraFoam Pad
Twice the foam on a single pad! The orange foam is a light cutting, closed cell foam with a small pore size. It removes light to moderate swirls and imperfections using a swirl remover or light compound. The green foam has larger pores than the orange and works well to remove moderate swirls and oxidation using a light to medium cut compound.
Custom 6 Inch Professional White/Blue DuraFoam Pad
Two types of foam give a single pad more versatility. The white side is the ultrafine polishing foam, a very soft foam that is ideal for the application of waxes and sealants. The blue side is a finishing foam that removes very light swirls and imperfections. Apply waxes or fine polishes with the blue foam to enhance the paint’s gloss.
Don’t just change pads – change the whole system! The Edge 2000 6 Inch DuraFoam Pads will revolutionize your detailing process!
|
|
|
