 Receive 2 FREE 5 1/4 inch CCS Orange Light Cutting Pads with your purchase of this kit! A $13.98 value.
Turbo charge your detailing process with XMT’s only true polishing compound!
XMT Heavy Duty Swirl Remover #4 is a polishing compound for the worst swirls, scratches and oxidation. The heavy grade abrasives blend away severe swirls and scratches while intense cleaners remove dull, oxidized paint. Pair XMT #4 with the Porter Cable 7424 to restore the oldest, most weathered paint to a like-new gloss.
Swirl removal, particularly compounding, is a multi-step process. XMT Series by Pinnacle has swirl removal down to science with user-friendly, truly effective swirl removers. First, XMT Heavy Duty Swirl Remover #4 levels the rough edges of swirls and scratches while removing oxidation. Then XMT Ultra Fine Swirl Remover #1 refines the paint surface with smaller abrasives to enhance gloss and eliminate haze. Afterwards, XMT Carnauba Finishing Glaze fills in any remaining scratches and maximizes gloss.
This kit includes Lake Country’s CCS Dual Action 6.5 inch Smart Pads™ Foam Pads. These flat full contact buffing pads work with your dual action polisher to correct automotive paint more easily than ever before. The CCS Smart Pads™’ user-friendly features provide better control, less product waste, and a more successful detail.
The Pinnacle XMT Porter Cable 7424 Heavy Duty Swirl Remover Kit gives you the products and tools to completely restore dull, badly oxidized paint. The kit includes:
 |
Porter
Cable 7424 Variable Speed Polisher
Our most popular and most versatile machine! Built to last, this rugged 3.7
amp polisher has 100-percent ball bearing construction. The spiral and bevel
gearing provides for smooth operation and efficient transfer of power. A
variable speed dial sets the orbit rate between 2,500 and 6,000 orbits per
minute for precise control. The speed dial is on the end of the motor, out
of the way, preventing accidental changing of the speed. A handy slide
switch prevents hand fatigue when the unit must be run for the extended
periods of time that polishing operations require. The random orbit action
of the special six-inch polishing pad provides a smooth, swirl-free finish.
An included side handle fits either the left or right side for maximum
comfort. Includes polisher, polishing pad no. 54745, wrench no. 48779, and
operator's manual. |
 |
Dual
Action 5” Flex Backing Plate
With hook facing, this plate allows you to switch pads quickly and continue
polishing. A recessed edge and flexible urethane construction gives your
paint extra protection from run-ins with the backing plate. Strict
tolerances on weight, balance, roundness, and flatness ensure consistent
performance time and time again.
|
|
 |
12 oz.
XMT Heavy Duty Swirl Remover #4
XMT Heavy Duty Swirl Remover #4
is a true compound. It
eliminates oxidation, severe swirls and scratches with a blend of abrasives,
cleaners, and lubricating oils. The cleaners help remove dead, oxidized
paint while the abrasives level scratches and severe swirls. The oils help
lubricate the abrasive particles to minimize hazing, though some hazing is
expected and easily removed with the next step, XMT Ultra Fine Swirl Remover
#1.
|
|
 |
12 oz.
XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with
the naked eye. The sheer number and minute size of the abrasive particles
blend away fine flaws in the clear coat without leaving any trace of surface
marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated
Micro Abrasives leave the paint finish glossy and smooth, just like new.
XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to
show signs of age. It can also be used as a finishing polish.
|
|
 |
12 oz.
XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, haziness,
and overall dullness – to increase depth and clarity. At the same time, a
layer of carnauba bonds to the paint surface to further enhance the dynamic
shine created by the glaze. What can’t be removed with the cleaners is
filled in with carnauba to create a smooth, flawless finish. It’s
perfection and protection in one! Use XMT Carnauba Finishing
Glaze as the finale to your detailing process. To increase depth and
brilliance, top the glaze with Pinnacle Signature Series II.
|
 |
1 Orange 6.5
Inch Light Cutting Pad
Firm, high density foam for scratch and defect removal. Use this pad with
polishes and swirl removers. It’s an all around pad that will work on most
light to moderate imperfections. |
 |
1 White
6.5 inch Polishing Pad
This high absorption foam formula is intended for the application of waxes,
micro-fine polishes and sealants. This pad has very light cutting power so
it’s perfect for pre-wax cleaners.
|
 |
2 Gray 6.5 Inch
Finishing Foam Pads
Least abrasive. Composition is firm enough to withstand added pressure
during final finishing to remove buffer swirls. Use with machine glaze or
finishing polish. Ultra-soft and incredible for a putting on that finishing
touch.
|
 |
2 Cobra Microfiber Towels, 16 x 16 inches
Constructed of the finest quality microfibers the Cobra Detailing Towel sets the standard with an outstanding 80/20 blend of polyester/polyamide filament, woven so densely they boast over 200,000 strands of fiber per square inch of fabric! These strands are nearly invisible to the naked eye, and are 100 times smaller than a human hair! Use this cloth for cleaning, buffing, and wiping away wax.
|
 |
2 Cobra
Microfiber Bonnets (COLOR MAY VARY)
Use these microfiber bonnets to remove polishes or wax from your vehicle.
Slip a bonnet over a 6.5 inch pad and buff away residue to uncover a vibrant
shine. The 70/30 blend of microfiber is extremely gentle and will not
contribute to micro-marring. Each bonnet is washable and reversible.
|
|
 |
1
Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around
trim and mirrors, places that your polisher can’t go. The foam applicator
has gray finishing foam on one side and orange light cutting foam on the
other. This is two applicators in one!
|
All pads included in the XMT Heavy Duty Swirl Remover Complete Kit have hook & loop backing, which attaches securely to a 5 or 6 inch hook & loop backing plate. The 6.5 inch pads in this kit are intended for a dual action polisher, such as the Porter Cable 7424.
Use the products as follows:
- Prep pads before polishing with Pinnacle XMT Polishing Pad Conditioner. On significant swirls and flaws, apply XMT Heavy Duty Swirl Remover #4 with the orange light cutting pad. (If you are unsure of the severity of the flaws, start with a white polishing pad. Step up to the orange pad if necessary.) Use XMT #4 only on problem areas to avoid unnecessary compounding of healthy paint. Buff off residue after each section.
- Apply XMT Ultra Fine Swirl Remover #1 with the white polishing pad or the Polish ‘N Wax Applicator. You can do an all-over polish to remove the lightest imperfections with this gentle swirl remover. Buff off residue after each section.
- Your paint should be in great shape at this point. Apply XMT Carnauba Finishing Glaze with one of the gray foam pads. Buff off the residue as you complete each section.
- Your vehicle will be glossy and reflective after applying the glaze. For the deepest shine and longer-lasting protection, use the second gray pad to apply your favorite wax. We recommend Pinnacle Signature Series II Carnauba Paste Wax for a fantastic reflection on any color.
- Clean each pad after use with Pinnacle XMT Polishing Pad Cleaner. Spray each pad generously with the cleaner and toss them in a bucket of clean water. Agitate with a Foam Conditioning Brush if necessary. Rinse well and let air dry.
The Pinnacle XMT Porter Cable 7424 Heavy Duty Swirl Remover Complete Kit is an exceptional value, particularly compared to the price of repainting. With the power of XMT Heavy Duty Swirl Remover, this kit can cure your vehicle’s worst paint problems to restore the showroom gloss.
Kit includes:
Porter Cable 7424
5 inch Dual Action Flex Backing Plate
12 oz. XMT Heavy Duty Swirl Remover #4
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
2- 6.5 inch CCS Gray Finishing Pads
2- 16 x 16 inch Cobra Microfiber Towels
2 Cobra 70/30 Microfiber Bonnets COLOR MAY VARY
Polish ‘N Wax Applicator
A total retail value of $289.87. SAVE $39.88!
- Additional discounts are not
applicable.
- Please call for an expedited shipping
quote on this item.1-800-869-3011
|
| Upgrade this kit to the Porter Cable 7424 HD Plus! |
|
The HD Plus has a heavy duty 25 ft, 16 gauge power
cord to give you maximum maneuverability and performance. This cord is 2 ½
times the length of the standard cord and it’s wired into the polisher. This
is not an extension cord – it's a unit upgrade! The Porter Cable 7424 HD
Plus includes a 2 year warranty.
|
|
| Select the Porter Cable 7424 HD Plus kit
option at the bottom of the page. |
|
|
