303 Graphene Nano Spray Coating 16 oz

Not sure if you'll like it? See what Mike Phillips has to say about it HERE!

A faster way to coat!

The 303 Graphene Nano Spray Coating is a graphene oxide-based coating that will provide premium protection for one year. 303 Graphene Nano Spray Coating reduces water spots with its hydrophobic properties. 303 Graphene Nano Spray Coating also features enhancing gloss and clarity capabilities, plus 303 Graphene Nano Spray Coating is easy to use and be used on a variety of surfaces.

You don't always have the time to apply the full detail a coating requires. Especially not when you must decontaminate, and paint correct first. As these steps are typically needed for better bonding between the surface and the product. However, with 303 Graphene Nano Spray Coating, you can skip those steps entirely if you choose to do so, but still get optimal results.

303 Graphene Nano Spray Coating provides excellent protection for 12 months. As it works, 303 Graphene Nano Spray Coating bonds to the surface without prior paint correction or decontamination. Thanks to the fact that it reduces surface temperatures, it will in-turn reduce the amount of water spots. This product features a high-water contact angle, which means that its hydrophobic properties are increased which allows for more water shedding and stops contaminants from sticking to the surface. Once you've finished applying, the paint will have enhanced gloss and clarity as well.

It's hard to mess up the application process, with how easy it is to apply. Simply spray the product onto a microfiber towel and work in a crisscross pattern on the surface. Let it dry to a haze and then buff away. Don't worry if you missed a spot when buffing or if you let it sit too long, you can still come back and buff away whatever is remaining. You can even use it in direct sunlight! As a matter-o-fact, applying in the heat will help the product cure faster. Plus, 303 Graphene Nano Spray Coating works well on paint, glass, chrome, wheels and trim and can even be used on top of existing coatings.

Directions:
-Ensure paint is clean and dry before applying product.
-If desired, correct your car's paint before applying, but this is not necessary for the product to fully bond to the paint.
-Spray onto a microfiber or foam applicator.
-Apply to the surface in a crisscross pattern to ensure complete coverage.
-After application, allow product to cure and haze white, then buff off with a clean dry microfiber towel.
-After buffing, no cure time is needed before being introduced to water.

15.5 oz.

Federal regulations prohibit the shipment of this products by air, 3 Day, 2 Day, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses.