BLACKFIRE Pro Ceramic Paint Coating Black Edition 50 mL

BLACKFIRE Pro Ceramic Paint Coating Black Edition is a 9H formula that can last up to 4 years, all with up to five minutes of working time to allow for a fully body panel coverage. Unique in its formula, BLACKFIRE Pro Ceramic Paint Coating Black Edition sweats into beads. BLACKFIRE Pro Ceramic Paint Coating Black Edition is a professional grade paint coating and will protect the paint from environmental contaminants. BLACKFIRE Pro Ceramic Paint Coating Black Edition will also sheet water and provide a brilliant shine. Easy-to-apply as you work larger panels at a time. BLACKFIRE Pro Ceramic Paint Coating Black Edition is also safe for all vinyl wraps and PPFs too!

If you are looking for a professional grade coating that has extra strength and durability, while also producing water sheeting, than look no further than BLACKFIRE Pro Ceramic Coating Black Edition. BLACKFIRE Pro Ceramic Paint Coating Black Edition is a 9H formula, meaning it is extremely hard once it cures on the surface. When the surface is hard, it is harder for pollutants and contaminants to get into surface and cause problems. Because of this 9H formula, your surface protection can last up to five years. Unlike a lot of other ceramic coatings out there where you have to work on small panels at a time, with BLACKFIRE Pro Ceramic Paint Coating Black Edition you can work larger areas at a time, such as your entire hood or full door panel.

BLACKFIRE Pro Ceramic Paint Coating Black Edition is a professional grade paint coating and will do many things for your surface. First, thanks to its extra strength durability in hardness, it will protect against environmental contaminants. Will also sheet water, allow for water to sheet off your surfaces, rather than sit and accumulate more contaminants. Plus, with all this protection and lack of contaminants you will have a brilliantly shining surface. BLACKFIRE Pro Ceramic Paint Coating Black Edition is safe to use on all vinyl wraps and paint protection films. While it can be added over top of matte vinyl wraps or PPFs, it will generate gloss on the surface. If you do not want your matte wrap or PPF to have a gloss, it is not advised to apply BLACKFIRE Pro Ceramic Paint Coating Black Edition on it.

Directions:

*Best to use on cool surfaces.
1. Wash, dry and correct paint if needed before applying paint coating.
2. Using BLACKFIRE Paint Prep and clean microfiber towel, cleanse the surface of any oils and residue.
3. Apply several droplets of product onto a foam applicator and apply to the surface.
4. You can work in a larger area, including the entire hood or door panels, because of the long working time.
5. When the coating is ready to be buffed away, you will notice the surface "sweating" beads of product rather than the traditional rainbow appearance.
6. Use a clean microfiber towel to buff excess product away.
7. Allow coating to cure for approximately 12-24 hours before exposing to moisture.
8. If you want to apply multiple layers of coating, wait an hour between each layer. adding a second layer will have noticeable positive improvement to the gloss and protection of your coating. 3 layers will provide a small amount of additional protection, but not a significant amount. Adding a 4th layer would not provide any additional protection or gloss and is not advised.

Federal regulations prohibit the shipment of this products by air, 3 Day, 2, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses.