BLACKFIRE Pro Ceramic Coating 50 mL

BLACKFIRE Pro Ceramic Coating bridges the gap between entry level commercial ceramic coatings and professional-only industrial ceramic coatings, allowing everyone to achieve an extraordinary mirror-like shine! BLACKFIRE Pro Ceramic Coating was designed using a solvent and fluorine free formula to maximize its user-safety and ensure that it can be applied anywhere. The thermoplastic component contained in the formula for BLACKFIRE Pro Ceramic Coating creates a flexible, cross-linked matrix that provides 9H+ hardness that is graded to last up to 2 years when properly maintained. The incredible structural integrity of this matrix makes BLACKFIRE Pro Ceramic Coating one of the most abrasion and corrosion resistant ceramic coatings on the market today!

The introduction of ceramic coatings into the automotive detailing industry has pushed the limits of the level of protection that is available. When the expected life-time of these coatings is measured in years, it is difficult to shy away from the protection that they offer. There is one major downfall that these ceramic coatings tend to have in common though, they are much more difficult to apply than your standard car wax. When the BLACKFIRE Pro Ceramic Coating was being formulated, maximizing the ease of use was a crucial aspect to achieve, and achieved it was. BLACKFIRE Pro Ceramic Coating was formulated without any aromatic solvents that would otherwise negatively affect the consistency and viscosity of this product, drastically increasing how difficult it is to apply.

BLACKFIRE Pro Ceramic Coating provides an increased level of protection compared to what you would typically receive from a ceramic coating. This increase in protection is due to the unique thermoplastic components used in the formulation of BLACKFIRE Pro Ceramic Coating. This thermoplastic component works on the molecular level to form a cross-linked matrix that is capable of flexing with your paint surface. The cross-linked structure of this matrix is what provides the incredible 9H+ hardness level that BLACKFIRE Pro Ceramic Coating boasts, while the ability to flex with your paint gives it the durability to protect your paint for up to 2 years. Of course, all the while, this matrix will repel any moisture away from your paint surface, causing water to bead and sheet off!

If you are a person who takes great care of their vehicle, it is unlikely that applying a ceramic coating will be the last thing you do to your vehicle. Your maintenance washes and chemical decontaminations will likely continue so you can maintain the best shine possible. These highly corrosive and abrasive processes would typically break down most protective products and cut the lifetime of them in half. The chemical composition of BLACKFIRE Pro Ceramic Coating allows it to resist the damage that these necessary processes tend to create, allowing it to far outlast the point where other protective products would begin to breakdown and fail!

Directions:

If necessary, use BLACKFIRE Compound and BLACKFIRE Polish to remove swirls and scratches from your paint's surface. If paint correction is necessary, you can use BLACKFIRE Prep Spray to prep the surface for proper bonding.

If your vehicle does not have any major imperfections, BLACKFIRE Pro Primer Polish can be used to remove light swirls and scratches as well as prep the surface for the application of BLACKFIRE Pro Ceramic Coating. Allow the BLACKFIRE Pro Primer Polish to cure for at least 1 hour before application of coating.

1. Shake this product well before use.

2. Wrap a suede towel around a foam applicator block and apply a straight line of product onto the towel.

3. Working in a 3' x 3'section, apply the product to the paint in straight lines with a 50% overlap between strokes. Allow BLACKFIRE Pro Ceramic Coating to flash then gently buff the surface with a soft, dry microfiber towel. Switch to a clean side of the towel frequently to avoid streaking.

4. If you would like to apply a second coat, you may do so immediately after the first. Allow this product to cure for 12 hours before exposure to moisture. Avoid washing your vehicle for 72 hours after application.

50 ml.

 Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.