CARPRO DQUARTZ Go 50 ml

CARPRO DQUARTZ Go is the outstanding professional-grade coating that has been reformulated for easy use by everyday consumers. Without any sacrifices to the coating’s durability and excellent hardness-increasing properties, the formula has been tweaked for increased smoothness.

• Delivers superior protection and reliably increases surface hardness by up to 5 points.
• Retains its exceptional hardness, effectively helping to reduce swirls and wear, ensuring long-lasting protection.
• Smoothing formula based on fluoropolymers which maintains the coating's hardness and provides a satisfyingly smooth touch.

Directions:

1. Shake DQUARTZ GO before use.
2. Wrap a 4" microfiber suede around the grey side of applicator block or simply use our MF applicator. Slowly open bottle and drag one or two lines of product down the applicator.
3. Spread across the paint in a criss-cross pattern on approximately 50x50cm sections at a time depending on conditions.
4. Wait 3-5 mins until it flashes (at 24°C; wait longer in lower temps) and once it feels slightly tacky, gently wipe off with a CARPRO 2Face Microfiber Towel. Do not use too much pressure. Be sure to remove all excess residue and only then move to the next section.
5. Switch out the 4" suedes every ~2 panels. 1 layer of DQ Go is enough, but if you wish to apply an extra layer, you may do so after 1 hour.
6. Keep out of the elements for 48 hours.