Earn 1 Autogeek Rewards Mile for every $1 you spend!
Product description
The best pressure washer for detailing shops!
For detailers that own or work in a busy detailing shop, the Dirt Killer KWS700TS Pressure Washer will make your job a whole lot easier! Capable of up to 2400 PSI, the Dirt Killer KWS700TS Pressure Washer can blast off any dirt, mud, or filth with little effort on your part! The Dirt Killer KWS700TS Pressure Washer has a flow of 3.3 GPM, so you will never feel like you are lacking the water flow you need! The industrial-grade Kranzle AQ pump is extremely durable, capable of running dry or on bypass for hours! The Dirt Killer KWS700TS Pressure Washer will last for a long while thanks to the Total Stop feature that shuts the machine off whenever you aren't spraying!
Car washes and detailing shops have a huge workload! There are constantly cars coming through to be washed or detailed. With a workload like that, it is nearly impossible to keep ahead of it all if you are having to wash every car solely by hand! You need the Dirt Killer KWS700TS Pressure Washer to get the jobs done the right way as quickly as possible!
The Dirt Killer KWS700TS Pressure Washer was built for industrial use, so it is definitely up to the task of washing car after car without faltering! And the 2400 PSI and 3.3 GPM of the Dirt Killer KWS700TS Pressure Washer give you all the power and flow you need to work quickly and effectively! Get a pressure washer that can stand up to your shop's heavy workload! Get the Dirt Killer KWS700TS Pressure Washer!
| Specifications: | Features: | Additional Parts: |
| PSI: 2400 max (adjustable) |
Auto on / off gun-jet control with Total Stop | 33 ft wire braided hose on hose reel |
| GPM: 3.3 |
Runs dry or on bypass for hours | Professional gun-jet lance |
| Electrical Requirements: 220V, 23A, 60Hz, single-phase |
Gauge | |
| Weight: 187 lb |
Safety coupler screw connections | |
| Dimensions: 14" length, 31" width, 28" height |
Vario-Jet nozzle for high-pressure wash | |
| Warranty: 1 year commercial |
What PSI pressure washer do I need for car detailing?
A PSI range of 1400 - 2000 PSI is ideal for washing cars. You'll also want a GPM (Gallons Per Minute) of atleast 1.4 to ensure ideal water flow and foam generation if using a foam cannon.
What PSI is safe for washing cars?
The ideal PSI range for washing cars is 1400 - 2000 PSI. A car's paint can safely handle up to 2000 PSI. However, since the pressure is more concentrated at the spray tip, you need to be careful about how close the spray tip is to your paint. Always start from a distance of several feet and slowly move closer until you achieve the results you want. Never get closer than 6 inches away from the car's paint or 12 inches away from the car's trim. Never use a nozzle that is less than 20 degrees to ensure the pressure is not dangerously concentrated.
How do I use a pressure washer for detailing?
There are 4 ways to use a pressure washer for detailing: 1. Rinsing your car prior to washing to remove loose debris. 2. Using with a foam cannon to apply an even coat of car shampoo as a pre-soak to further loosen contaminants. 3. Using with a foam cannon to evenly apply your car wash solution before you start agitating the surface with a wash mitt, sponge, or brush. 4. To quickly and effectively rinse any remaining shampoo or depbris from the car's surface after washing.
Is it worth buying a pressure washer for car detailing?
Yes. If you are a professional detailer looking to increase the speed and effectiveness of your car washing, it is worth it to buy a pressure washer. However, if you are simply washing your own car, while a pressure washer would still help you a lot, the benefits you get from a pressure washer may not outweigh the cost. You would be better served using a foam gun with your standard garden hose.
Do you need a pressure washer to detail a car?
No. A pressure washer is not necessary to detail a car. However, a pressure washer will greatly increase the speed and effectiveness of your car washing.
Product Related
