DP GR4 Graphene Wash 12 oz

Washing with graphene!

DP GR4 Graphene Wash is a washing system that revitalizes graphene surface coatings. Formulated with degreasing agents, DP GR4 Graphene Wash also cleans with its graphene-ceramic resins ingredients. The properties of DP GR4 Graphene Wash remove harmful contaminants, but not affect the hydrophobic surface and the durability the coat provides. You can use DP GR4 Graphene Wash with the traditional bucket system or with a foam gun, cannon or lance.

Graphene coatings are unique in themselves, requiring extra special care. Graphene has special properties that need to be protected, but at the same time, you want to be able to wash your vehicles with maintenance washes. So where is the middle grown? The perfect product to keep your graphene coating properties, but still be able to wash your car, is DP GR4 Graphene Wash.

What to expect:
• A GRAPHENE CLEAN! Boost your graphene coating while also cleaning away contaminants.
• MULTIPLE WAYS TO USE! Use in the traditional bucket method, foam gun, lance or cannon.
• KEEP IT SAFE! Washing your car won't remove any hydrophobic properties or durability.

DP GR4 Graphene Wash is formulated to be a multi-purpose washing liquid designed to not only clean but revitalize graphene coatings. Thanks to graphene-ceramic resin ingredients, DP GR4 Graphene Wash cleans your vehicle's surface that is laid with graphene coatings. Graphene coatings give your surface durability and hydrophobicity, which can sometimes be ruined by wash. But when washing your vehicle with DP GR4 Graphene Wash, these properties are not affected, but enhanced. Besides revitalizing the surface, DP GR4 Graphene Wash is formulated with a high-foaming degreaser that will easily remove even the most stubborn surface staining.

There are a variety of ways to use the DP GR4 Graphene Wash. You can use DP GR4 Graphene Wash in the traditional sense with the bucket method or in a foam gun, lance or cannon. When using it with traditional bucket method, add 3 ounces of DP GR4 Graphene Wash to a 5-gallon bucket and fill with water, using a strong jet of water to activate the suds. Next, take a wash mitt and wash the car, starting from the top and working your way down. Finally, fully rinse the entire car and thoroughly dry. If you are using DP GR4 Graphene Wash in a foam gun, cannon or lance, fill the reservoir with water and add 2 ounces of DP GR4 Graphene Wash. Shake the solution and spray the surface of the vehicle, allowing the foam to dwell for 30 seconds. Do not allow the product to dry on the surface, but instead wash the surface using wash mitt and then rinse and dry thoroughly.

DIRECTIONS:

In a Foam Gun, Cannon, or Lance:
-Fill your reservoir with water and add 2 oz. of DP GR4 Graphene Wash.
-Gently shake solution to activate the wash.
-Spray surface of vehicle with foam and allow to dwell for approximately 30 seconds, but do not allow to dry.
-Wash surface using a wash mitt, starting at the top and working your way down.
-Rinse fully and thoroughly dry vehicle to avoid water spotting.

In a Traditional Bucket:
-Add 3 oz. of DP GR4 Graphene Wash to a 5-gallon bucket and fill with water.
-Using a strong jet of water to activate suds.
-Wash surface using a wash mitt, starting at the top and working your way down.
-Rinse fully and thoroughly dry vehicle to avoid water spotting.

12 oz.

Federal regulations prohibit the shipment of this products by air, 3 Day, 2 Day, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses.

.